Sony DVS-9000SF User Manual page 349

To display the Serial Tally menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF7 'Serial
Tally.'
The serial tally settings appear in the status area.
Setting or changing the serial tally settings
Use the following procedure.
1
In the <Serial Tally Port> group of the Serial Tally menu, select the port to
which the setting applies.
2
In the <Tally Type> group, press the tally types to select. (You can select
up to four.)
Note
The selectable tally types depend on the settings in the Group Tally menu.
Making the serial tally source address settings
To set the serial tally source address for each port, use the following procedure.
1
In the Serial Tally menu, press [Source Assign].
The Source Assign menu appears.
In the status area, the tally types and source address set for the serial tally
port appear.
2
In the <Serial Tally Port> group, select the port to which the setting
applies.
3
Using any of the following methods, select the port bit number.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
4
Turn the knob to select the source address.
Knob
2
Parameter Adjustment
Bit No Bit selection
Parameter Adjustment
Source Addr Source address selection
Setting values
1 to 128
Setting values
1 to 1024
Setup Relating to Router Interface and Tally
349