Beveled Edge Settings - Sony DVS-9000SF User Manual

4

Beveled Edge Settings

This effect applies a beveled frame appearance to an image.
For sample images, see "DME Special Effects" in Chapter 1 (Volume 1).
Applying a beveled edge
Use the following procedure.
1
2
28
DME Special Effect Operations
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
To soften the edges of the image, press [Edge Soft], turning it on, and set
the following parameter.
Knob Parameter
1 Soft
Note
Edges cannot be softened when the Crop effect is disabled.
In the DME menu, select VF1 'Edge' and HF2 'Beveled Edge.'
The Beveled Edge menu appears.
Press [Beveled Edge], turning it on.
This enables the beveled edge, and you can now use the knobs to adjust the
parameters.
Note
When the border is enabled, the edge soft function (see page 28) is not
available.
Parameter group [2/2]
Adjustment
Crop position on top side
Crop position on left side
Crop position on right side
Crop position on bottom side
Adjustment
Softness of edges
Setting values
–2.25 to +2.25
–4.00 to +4.00
–4.00 to +4.00
–2.25 to +2.25
Setting values
0.00 to 100.00