Sony DVS-9000SF User Manual page 272

5
To cancel an assignment
After selecting the relevant button, press [Clear].
List of utility commands and memory recall button status
The following table shows the utility commands that can be assigned to
memory recall buttons.
Command name
SWR Remote1 Enbl
|
SWR Remote4 Enbl
DME1 Editor Port Enbl DME1 editor port enabled/disabled
DME2 Editor Port Enbl DME2 editor port enabled/disabled
2nd System Enbl
ME1 PGM1 ST
|
ME1 PGM4 ST
ME1 PVW ST
ME1 Clean ST
ME1 K-PVW ST
ME2 PGM1 ST
|
ME2 PGM4 ST
ME2 PVW ST
ME2 Clean ST
ME2 K-PVW ST
ME3 PGM1 ST
|
ME3 PGM4 ST
ME3 PVW ST
ME3 Clean ST
ME3 K-PVW ST
272
Setup Relating to Operations From the Control Panel
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
In the utility/shotbox control block, the assigned button lights orange.
If a shotbox register was assigned, the register name appears.
a) Function
Switcher Remote 1 enabled/disabled
|
Switcher Remote 4 enabled/disabled
(Dual Simul Mode) Second system
enabled/disabled
M/E-1 PGM1 output safe title on/off
|
M/E-1 PGM4 output safe title on/off
M/E-1 preview output safe title on/off
M/E-1 clean output safe title on/off
M/E-1 key preview output safe title on/
off
M/E-2 PGM1 output safe title on/off
|
M/E-2 PGM4 output safe title on/off
M/E-2 preview output safe title on/off
M/E-2 clean output safe title on/off
M/E-2 key preview output safe title on/
off
M/E-3 PGM1 output safe title on/off
|
M/E-3 PGM4 output safe title on/off
M/E-3 preview output safe title on/off
M/E-3 clean output safe title on/off
ME-3 key preview output safe title on/
off
Button status
Lit green Lit orange
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off