Sony DVS-9000SF User Manual page 263

Hold: Acts as a shift button, and the shifted version of the AUX delegation
buttons is enabled while the button is held down.
Lock: Acts as a shift button, and pressing the button toggles between the
shifted version and the unshifted version of the AUX delegation buttons.
Off: Acts as an AUX delegation button. In a 16-button system it acts as button
number 16, in a 24-button system as button number 24, and in a 32-button
system as button number 32.
Using the auxiliary bus control block for router control
To make router control settings, display the Setup>Panel>Aux Assign>RTR
Mode Setting menu.
Note
This setting is disabled for the CCP-9000.
To display the RTR Mode Setting menu
Use the following procedure.
1
In the Engineering Setup menu, select VF2 'Panel' and HF3 'Aux Assign.'
The Aux Assign menu appears.
2
Press [RTR Mode Setting].
The RTR Mode Setting menu appears. The left of the status area shows the
destination number assignment status and source table, and the right side
lists the destinations that can be assigned.
To assign a destination to a destination selection button
In the RTR Mode Setting menu, use the following procedure.
1
Using any of the following methods, select a destination selection button
and the destination to be assigned to the button.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob
1
2
• For a button whose operation you want to disable, press [Inhibit].
Parameter Adjustment
Dest No Destination selection button
selection
No Destination selection in S-Bus
space
Setup Relating to Operations From the Control Panel
Setting values
1 to 64
1 to 1024
263