Sony DVS-9000SF User Manual page 283

Automatic first keyframe insertion: When an empty register is recalled,
to automatically insert a first keyframe of the state at that point, turn
[1st KF Auto Insert] on.
Automatic effect saving: To automatically save an effected when it is
recalled after being edited, turn [Effect Auto Save] on.
Keyframe duration default value: Press [Default KF Duration], then
enter the default value from the numeric keypad window.
Setting the first keyframe when a rewind is executed
For P-Bus, GPI, and DDR/VTR timeline operations, to execute the first
keyframe when a rewind is carried out, set each external device on in the
<REWIND&1st KF> group.
Note
When an effect is executed by pressing the [RUN] button with this setting on,
the first keyframe action is not executed.
GPI: setting for the GPI timeline
P-Bus: setting for the P-Bus timeline
DDR/VTR: setting for the VTR/disk recorder timeline
Setting the Source and Destination names
To set the Source and Destination names used in the control panel, use the
following procedure.
Note
Before carrying out these settings, it is necessary to set the number of the S-Bus
description name.
For details of the operation, see "To set the group number of an S-Bus
description name" (page 340) under "Setup Relating to Router Interface and
Tally".
1
In the <Source/Dest Name> group of the Panel>Operation menu, select the
names to be used from the following.
SW'er Local: Source names set in the Xpt Assign menu, and fixed bus
names
S-Bus Descript: Description names set in the router
S-Bus Type + No.: Type + No. set in the router (In this case always eight
characters.)
Setup Relating to Operations From the Control Panel
283