Sony DVS-9000SF User Manual page 75

Rings settings
The Rings effect partitions the image into rings that rotate while moving in the
same direction.
To apply the Rings effect
With the Rings menu displayed, use the following procedure.
1
To make transition settings, press [Transition] and set the following
parameters.
Knob
1
2
3
2
To set the partition method, press [Partition] and set the following
parameters.
Knob
1
2
3
3
To set the ring center position, press [Position] and set the following
parameters.
Knob
1
2
4
To partition into pixels, press [Pixel], turning it on, and set the following
parameters.
Knob
1
2
Parameter Adjustment
Transition Degree of transition
Random Degree of randomness in distance
moved by each block
Spiral Amount of movement toward
periphery accompanying transition
Parameter Adjustment
Width Width of partition
Random Degree of randomness in partition
width
Angle Starting angle of effect
Parameter Adjustment
H Horizontal center position
V Vertical center position
Parameter Adjustment
Density Degree to which image disappears
around periphery
Random Degree of jaggies at block edges
Setting values
0.000 to 100.000
0.000 to 100.000
–1.000 to +1.000
Setting values
0.000 to 100.000
0.000 to 100.000
–8.000 to +8.000
Setting values
–5.000 to +5.000
–4.000 to +4.000
Setting values
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
75