Agilent Technologies MSO6102A Programmer's Reference Manual page 46

2
Commands Quick Reference
Table 13 :MARKer Commands Summary (continued)
Command
:MARKer:Y1Position
<position>[suffix] (see
page 240)
:MARKer:Y2Position
<position>[suffix] (see
page 241)
n/a
Table 14 :MEASure Commands Summary
Command
:MEASure:CLEar (see
page 250)
:MEASure:COUNter
[<source>] (see
page 251)
:MEASure:DEFine DELay,
<delay spec> (see
page 252)
:MEASure:DEFine
THResholds, <threshold
spec> (see page 252)
46
Query
:MARKer:Y1Position?
(see page 240)
:MARKer:Y2Position?
(see page 241)
:MARKer:YDELta? (see
page 242)
Query
n/a
:MEASure:COUNter?
[<source>] (see
page 251)
:MEASure:DEFine? DELay
(see page 253)
:MEASure:DEFine?
THResholds (see
page 253)
Options and Query Returns
<position> ::= Y1 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y1 cursor
position value in NR3 format
<position> ::= Y2 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y2 cursor
position value in NR3 format
<return_value> ::= Y cursors delta
value in NR3 format
Options and Query Returns
n/a
<source> ::= {CHANnel<n>} for DSO
models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 |} for MSO
models
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= counter frequency
in Hertz in NR3 format
<delay spec> ::=
<edge_spec1>,<edge_spec2>
edge_spec1 ::= [<slope>]<occurrence>
edge_spec2 ::= [<slope>]<occurrence>
<slope> ::= {+ | -}
<occurrence> ::= integer
<threshold spec> ::= {STANdard} |
{<threshold mode>,<upper>,
<middle>,<lower>}
<threshold mode> ::= {PERCent |
ABSolute}
Agilent 6000 Series Oscilloscopes Programmer's Reference