Agilent Technologies MSO6102A Programmer's Reference Manual page 68

2
Commands Quick Reference
Table 32 :WAVeform Commands Summary (continued)
Command
n/a
:WAVeform:SOURce
<source> (see page
n/a
:WAVeform:UNSigned {{0
| OFF} | {1 | ON}} (see
page 461)
:WAVeform:VIEW <view>
(see page 462)
n/a
n/a
n/a
n/a
68
Query
:WAVeform:PREamble?
(see page 453)
:WAVeform:SOURce? (see
456) page 456)
:WAVeform:TYPE? (see
page 460)
:WAVeform:UNSigned?
(see page 461)
:WAVeform:VIEW? (see
page 462)
:WAVeform:XINCrement?
(see page 463)
:WAVeform:XORigin? (see
page 464)
:WAVeform:XREFerence?
(see page 465)
:WAVeform:YINCrement?
(see page 466)
Options and Query Returns
<preamble_block> ::= <format NR1>,
<type NR1>,<points NR1>,<count NR1>,
<xincrement NR3>, <xorigin NR3>,
<xreference NR1>,<yincrement NR3>,
<yorigin NR3>, <yreference NR1>
<format> ::= an integer in NR1
format:
• 0 for BYTE format
• 1 for WORD format
• 2 for ASCii format
<type> ::= an integer in NR1 format:
• 0 for NORMal type
• 1 for PEAK detect type
• 2 for AVERage type
• 3 for HRESolution type
<count> ::= Average count, or 1 if
PEAK detect type or NORMal; an
integer in NR1 format
<source> ::= {CHANnel<n> | FUNCtion
| MATH | SBUS} for DSO models
<source> ::= {CHANnel<n> | POD{1 |
2} | BUS{1 | 2} | FUNCtion | MATH |
SBUS} for MSO models
<n> ::= 1-2 or 1-4 in NR1 format
<return_mode> ::= {NORM | PEAK |
AVER | HRES}
{0 | 1}
<view> ::= {MAIN}
<return_value> ::= x-increment in
the current preamble in NR3 format
<return_value> ::= x-origin value in
the current preamble in NR3 format
<return_value> ::= 0 (x-reference
value in the current preamble in NR1
format)
<return_value> ::= y-increment value
in the current preamble in NR3
format
Agilent 6000 Series Oscilloscopes Programmer's Reference