Agilent Technologies MSO6102A Programmer's Reference Manual page 443

3
Commands by Subsystem
If the :WAVeform:FORMat is WORD (see page 448) is WORD, every other
data byte will be 0. The setting of :WAVeform:BYTeorder (see page 444)
controls which byte is 0.
If a digital channel is not displayed, its bit value in the pod data byte is
not defined.
Digital Channel BUS Data Format
Digital channel BUS definitions can include any or all of the digital
channels. Therefore, data is always returned as 16- bit values. :BUS
commands (see page 150) are used to select the digital channels for a bus.
Reporting the Setup
The following is a sample response from the :WAVeform? query. In this
case, the query was issued following a *RST command.
:WAV:UNS 1;VIEW MAIN;BYT MSBF;FORM WORD;POIN +1000;SOUR CHAN1
Agilent 6000 Series Oscilloscopes Programmer's Reference 443