Agilent Technologies MSO6102A Programmer's Reference Manual page 28

1
What's New
Command
*OPT (see
:OVLRegister (see
:PRINt (see
*RCL (Recall) (see
*SAV (Save) (see
*TRG (Trigger) (see
:TRIGger:TV:MODE (see
:TRIGger:TV:STANdard (see
:VIEW (see
:WAVeform:COUNt? (see
:WAVeform:POINts (see
:WAVeform:PREamble (see
28
page 87)
page 128)
page 130)
page 88)
page 92)
page 97)
page 427)
page 430)
page 137)
page 445)
page 449)
page 453)
Differences From 5462x/4x Oscilloscopes
The Option Identification query return format
now has license information (in addition to the
I/O module ID information fields which are
now always zero).
The Overload Event Register is now a 16-bit
register (instead of 8-bit) and it contains bits
that identify when faults occur on the
oscilloscope channels (in addition to the bits
that identify when overloads occur).
The options are now: COLor (instead of HIRes),
GRAYscale (instead of LORes), PRINter0
(instead of PARallel), BMP8bit (instead of
TIFF). (The PCL option is now invalid.)
The number of instrument state locations is 10
(instead of 3 for the 54620 Series oscilloscopes
or 4 for the 54640 Series oscilloscopes).
The number of instrument state locations is 10
(instead of 3 for the 54620 Series oscilloscopes
or 4 for the 54640 Series oscilloscopes).
The *TRG has the same effect as the :DIGitize
command with no parameters (instead of the
:RUN command).
The modes have been renamed (however, old
forms of the mode names are still accepted).
The P480L60HZ, P720L60HZ, P1080L24HZ,
P1080L25HZ, I1080L50HZ, and I1080L60HZ
standards are supported (in addition to
GENeric, NTSC, PALM, PAL, and SECam).
The number of pixel memory locations is 10
(instead of 3).
The count can be any value from 1 to 65536
(instead of 16383).
There is a new RAW "number of points" option
for retrieving the raw acquisition record data.
Also the maximum number of points that can
be retrieved from the normal measurement
record is 1000 (instead of 2000).
The xincrement format is 64-bit floating point
NR3 (instead of 32-bit), and the yreference
format is 32-bit NR1 (instead of 16-bit).
Agilent 6000 Series Oscilloscopes Programmer's Reference