Agilent Technologies MSO6102A Programmer's Reference Manual page 76

3
Commands by Subsystem
Table 33 Common (*) Commands Summary (continued)
Command
n/a
*RCL <value> (see
page 88)
*RST (see page 89)
*SAV <value> (see
page 92)
*SRE <mask> (see
page 93)
76
Query
*OPT? (see page 87)
n/a
n/a
n/a
*SRE? (see page 94)
Options and Query Returns
<return_value> ::= 0,0,<license
info>
<license info> ::= <All field>,
<reserved>, <Factory MSO>,
<Upgraded MSO>, <Probe field>,
<Memory>, <Low Speed Serial>,
<reserved>, <reserved>
<All field> ::= {0 | All}
<reserved> ::= 0
<Factory MSO> ::= {0 | MSO}
<Upgraded MSO> ::= {0 | MSO}
<Probe field> ::= 0
<Memory> ::= {0 | mem2M | mem8M}
<Low Speed Serial> ::= {0 | LSS}
<reserved> ::= 0
<reserved> ::= 0
<value> ::= {0 | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9}
See *RST (Reset) (see
<value> ::= {0 | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9}
<mask> ::= sum of all bits that are
set, 0 to 255; an integer in NR1
format. <mask> ::= following values:
Bit Weight Name Enables
--- ------ ---- ----------
7 128 OPER Operation Status Reg
6 64 ---- (Not used.)
5 32 ESB
4 16 MAV
3 8 ---- (Not used.)
2 4 MSG
1 2 USR
0 1 TRG
Agilent 6000 Series Oscilloscopes Programmer's Reference
page 89)
Event Status Bit
Message Available
Message
User
Trigger