Agilent Technologies MSO6102A Programmer's Reference Manual page 256

3
Commands by Subsystem
Vtop. If you want to move the delay measurement point nearer to Vtop or
Vbase, you must change the threshold values with the :MEASure:DEFine
THResholds command.
Return Format
<value><NL>
<value> ::= floating-point number delay time in seconds in NR3 format
See Also •
•
•
256
"Introduction to :MEASure Commands"
":MEASure:DEFine" on page 252
":MEASure:PHASe" on page 264
on page 248
Agilent 6000 Series Oscilloscopes Programmer's Reference