HP HPE FlexNetwork 7500 series Configuration Manual page 520

Step
5. Set the specified
COMMUNITY attribute for
BGP routes.
6. Set a cost for routes.
7. Set a cost type for routes.
8. Set the extended community
attribute for BGP routes.
9. Set the next hop for routes.
10. Set an IP precedence for
matching routes.
11. Redistribute routes to the
specified IS-IS level.
12. Set a local preference for BGP
routes.
13. Set MPLS labels.
14. Set the ORIGIN attribute for
BGP routes.
15. Set a preference.
16. Set a preferred value for BGP
routes.
17. Set a prefix priority.
18. Set a local QoS ID for
matching routes.
19. Set a tag value for IGP routes.
20. Set a traffic index for BGP
routes.
Command
apply community { none |
additive |
{ community-number&<1-32> |
aa:nn&<1-32> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
apply cost [ + | - ] cost-value
apply cost-type { external |
internal | type-1 | type-2 }
apply extcommunity { rt
route-target }&<1-32>
[ additive ]
•
Set the next hop for IPv4
routes:
apply ip-address
next-hop ip-address
[ public | vpn-instance
vpn-instance-name ]
•
Set the next hop for IPv6
routes:
apply ipv6 next-hop
ipv6-address
apply ip-precedence { value |
clear }
apply isis { level-1 | level-1-2
| level-2 }
apply local-preference
preference
apply mpls-label
apply origin { egp as-number
| igp | incomplete }
apply preference preference
apply preferred-value
preferred-value
apply prefix-priority { critical
| high | medium }
apply qos-local-id
{ local-id-value | clear }
apply tag tag-value
apply traffic-index { value |
clear }
508
Remarks
By default, no community attribute is
set for BGP routes.
By default, no cost is set for routes.
By default, no cost type is set for
routes.
By default, no extended community
attribute is set for BGP routes.
By default, no next hop is set for
IPv4 or IPv6 routes.
The apply ip-address next-hop
and apply ipv6 next-hop
commands do not apply to
redistributed IPv4 and IPv6 routes.
By default, no IP precedence is set.
By default, routes are not
redistributed into the specified IS-IS
level.
By default, no local preference is set
for BGP routes.
By default, no MPLS label is set.
By default, no ORIGIN attribute is
set for BGP routes.
By default, no preference is set.
By default, no preferred value is set
for BGP routes.
By default, no prefix priority is set,
which means the prefix priority is
low.
By default, no local QoS ID is set.
By default, no tag value is set for
IGP routes.
By default, no traffic index is set for
BGP routes.