HP HPE FlexNetwork 7500 series Configuration Manual page 270

Step
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
3. Configure the default MED
value.
Enabling MED comparison for routes from different ASs
This task enables BGP to compare the MEDs of routes from different ASs.
To enable MED comparison for routes from different ASs:
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Enable MED comparison for
routes from different ASs.
Enabling MED comparison for routes on a per-AS basis
This task enables BGP to compare the MEDs of routes from an AS.
Command
•
Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv6
[ unicast ]
•
Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
•
Enter BGP IPv6 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv6
multicast
default med med-value
Command
system-view
•
Enter BGP instance view:
bgp as-number [ instance
instance-name ]
•
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
compare-different-as-med
258
Remarks
N/A
The default MED value is 0.
Remarks
N/A
N/A
By default, MED comparison for
routes from different ASs is
disabled.