HP HPE FlexNetwork 7500 series Configuration Manual page 269

Step
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
3. Configure the default MED
value.
To configure the default MED value (IPv6 unicast/multicast address family):
Step
1. Enter system view.
Command
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
default med med-value
Command
system-view
257
Remarks
N/A
The default MED value is 0.
Remarks
N/A