HP HPE FlexNetwork 7500 series Configuration Manual page 322

Step
9. Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer
or peer group.
10. Specify a routing policy to
filter routes advertised to or
received from the 6PE peer
or peer group.
11. Advertise a default route to
the 6PE peer or peer group.
12. Save all routes from the 6PE
peer or peer group.
13. Configure BGP updates sent
to the 6PE peer or peer
group to carry only public AS
numbers.
14. Specify the maximum
number of routes that BGP
can receive from the 6PE
peer or peer group.
15. Specify a preferred value for
routes received from the 6PE
peer or peer group.
16. Configure the device as a
route reflector and the 6PE
peer or peer group as a
client.
17. Configure the SoO attribute
for a peer or peer group.
18. Return to user view.
19. Display information about the
6PE peer or peer group.
20. Display routing information
advertised to or received
from the 6PE peer or peer
group.
21. Soft-reset a BGP 6PE
connection.
22. Reset a BGP 6PE
connection.
Command
peer { group-name | ipv4-address
[ mask-length ] } prefix-list
ipv6-prefix-name { export | import }
peer { group-name | ipv4-address
[ mask-length ] } route-policy
route-policy-name { export | import }
peer { group-name | ipv4-address
[ mask-length ] }
default-route-advertise
[ route-policy route-policy-name ]
peer { group-name | ipv4-address
[ mask-length ] } keep-all-routes
peer { group-name | ipv4-address
[ mask-length ] } public-as-only
peer { group-name | ipv4-address
[ mask-length ] } route-limit
prefix-number [ { alert-only discard |
reconnect reconnect-time } |
percentage-value ] *
peer { group-name | ipv4-address
[ mask-length ] } preferred-value
value
peer { group-name | ipv4-address
[ mask-length ] } reflect-client
peer { group-name | ipv4-address
[ mask-length ] } soo site-of-origin
return
display bgp [ instance
instance-name ] peer ipv6 [ unicast ]
[ ipv4-address mask-length |
{ ipv4-address | group-name
group-name } log-info |
[ ipv4-address ] verbose ]
display bgp [ instance
instance-name ] routing-table ipv6
[ unicast ] peer ipv4-address
{ advertised-routes |
received-routes } [ ipv6-address
prefix-length | statistics ]
refresh bgp [ instance
instance-name ] ipv4-address
[ mask-length ] { export | import }
ipv6 [ unicast ]
reset bgp [ instance
instance-name ] ipv4-address
[ mask-length ] ipv6 [ unicast ]
310
Remarks
By default, no IPv6 prefix list is
specified.
By default, no routing policy is
specified.
By default, no default route is
advertised.
By default, routes from a peer
or peer group are not saved.
By default, BGP updates sent
to a 6PE peer or peer group
can carry both public and
private AS numbers.
By default, the number of
routes that a router can receive
from the 6PE peer or peer
group is not limited.
By default, the preferred value
is 0.
By default, no route reflector or
client is configured.
By default, no SoO attribute is
configured for a peer or peer
group.
N/A
Available in any view.
Available in any view.
Available in user view.
Available in user view.