Disabling Bgp To Establish A Session To A Peer Or Peer Group - HP HPE FlexNetwork 7500 series Configuration Manual

Step
5. (Optional.) Enable load
balancing for routes that
have different AS_PATH
attributes of the same length.
To specify the maximum number of BGP ECMP routes for load balancing (IPv6 unicast/multicast
address family):
Step
1. Enter system view.
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
3. Specify the maximum
number of BGP ECMP
routes for load balancing.
4. (Optional.) Enable BGP to
ignore the AS_PATH
attribute when it implements
load balancing.
5. (Optional.) Enable load
balancing for routes that
have different AS_PATH
attributes of the same length.

Disabling BGP to establish a session to a peer or peer group

This task enables you to temporarily tear down the BGP session to a peer or peer group. Then you
can perform network upgrade and maintenance without needing to delete and reconfigure the peer
or peer group. To recover the session, execute the undo peer ignore command.
To disable BGP to establish a session to a peer or peer group (IPv4 unicast/multicast address
family):
Command
balance as-path-relax
Command
system-view
•
Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv6
[ unicast ]
•
Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
•
Enter BGP IPv6 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv6
multicast
balance [ ebgp | eibgp | ibgp ]
number
balance as-path-neglect
balance as-path-relax
282
Remarks
By default, BGP cannot perform
load balancing for routes that
have different AS_PATH
attributes of the same length.
Remarks
N/A
N/A
By default, load balancing is
disabled.
By default, BGP does not ignore
the AS_PATH attribute when it
implements load balancing.
By default, BGP cannot perform
load balancing for routes that
have different AS_PATH
attributes of the same length.