HP HPE FlexNetwork 7500 series Configuration Manual page 237

Step
4. Create an IPv6 BGP peer
and specify its AS number.
5. Add the peer into the EBGP
peer group.
6. (Optional.) Configure a
description for the peer
group.
7. Create the BGP IPv6
multicast address family and
enter its view.
8. Enable the router to
exchange IPv6 unicast
routing information used for
RPF check with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv4 unicast address family):
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Create an EBGP peer group.
4. Add a peer into the EBGP
peer group.
5. (Optional.) Configure a
description for the peer
group.
6. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
7. Enable the router to
exchange IPv4 unicast
routing information with
peers in the specified peer
group.
Command
peer ipv6-address [ prefix-length ]
as-number as-number
peer ipv6-address [ prefix-length ]
group group-name [ as-number
as-number ]
peer group-name description
text
address-family ipv6 multicast
peer group-name enable
Command
system-view
•
Enter BGP instance view:
bgp as-number [ instance
instance-name ]
•
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ipv4-address [ mask-length ]
group group-name as-number
as-number
peer group-name description
text
address-family ipv4 [ unicast ]
peer group-name enable
225
Remarks
By default, no IPv6 BGP peers
exist.
By default, no peers exist in the
peer group.
The as-number as-number
option, if used, must specify the
same AS number as the peer
ipv6-address [ prefix-length ]
as-number as-number
command.
By default, no description is
configured for the peer group.
By default, no BGP IPv6 multicast
address family exists.
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check
with the peers in the group.
Remarks
N/A
N/A
By default, no EBGP peer groups
exist.
By default, no peers exist in the
peer group.
By default, no description is
configured for the peer group.
By default, no BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family exists.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.