Table of Contents
Advertisement
Step
2.
Enter BGP instance view or
BGP-VPN instance view.
3.
Configure BGP to ignore
IGP metrics during optimal
route selection.
Configuring the SoO attribute
After you configure the SoO attribute for a BGP peer or peer group, BGP adds the SoO attribute into
the route updates received from the BGP peer or peer group. In addition, before advertising route
updates to the peer or peer group, BGP checks the SoO attribute of the route update against the
configured SoO attribute. If they are the same, BGP does not advertise the route updates to the BGP
peer or peer group.
To configure the SoO attribute (IPv4 unicast/multicast address family):
Step
1.
Enter system view.
2.
Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
Command
•
Enter BGP instance view:
bgp as-number [ instance
instance-name ]
•
Enter BGP-VPN instance view:
a. bgp as-number [ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
bestroute igp-metric-ignore
Command
system-view
•
Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
270
Remarks
N/A
By default, BGP considers IGP
metrics during optimal route
selection. If multiple routes to
the same destination are
available, BGP selects the
route with the smallest IGP
metric as the optimal route.
Remarks
N/A
N/A
Advertisement
Table of Contents
Troubleshooting
