HP HPE FlexNetwork 7500 series Configuration Manual page 230

To configure an IBGP peer group (IPv6 unicast address family):
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Create an IBGP peer group.
4. Add a peer into the IBGP
peer group.
5. (Optional.) Configure a
description for the peer
group.
6. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
7. Enable the router to
exchange IPv6 unicast
routing information with
peers in the specified peer
group.
To configure an IBGP peer group (IPv4 multicast address family):
Step
1. Enter system view.
2. Enter BGP instance view.
3. Create an IBGP peer group.
4. Add an IPv4 peer into the
IBGP peer group.
5. (Optional.) Configure a
description for the peer
group.
Command
system-view
•
Enter BGP instance view:
bgp as-number [ instance
instance-name ]
•
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
group group-name [ internal ]
peer ipv6-address [ prefix-length ]
group group-name [ as-number
as-number ]
peer group-name description
text
address-family ipv6 [ unicast ]
peer group-name enable
Command
system-view
bgp as-number [ instance
instance-name ]
group group-name [ internal ]
peer ipv4-address [ mask-length ]
group group-name [ as-number
as-number ]
peer group-name description
text
218
Remarks
N/A
N/A
By default, no IBGP peer groups
exist.
By default, no peer exists in the
peer group.
The as-number as-number
option must specify the local AS
number.
By default, no description is
configured for the peer group.
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no IBGP peer groups
exist.
By default, no peer exists in the
peer group.
The as-number as-number
option must specify the local AS
number.
By default, no description is
configured for the peer group.