Configuring Ipv6 Is-Is Link Cost - HP HPE FlexNetwork 7500 series Configuration Manual

Step
10. Configure the maximum
number of redistributed
Level 1/Level 2 IPv6
routes.
11. Configure route
advertisement from
Level-2 to Level-1.
12. Configure route
advertisement from
Level-1 to Level-2.
13. Specify the maximum
number of ECMP routes
for load balancing.

Configuring IPv6 IS-IS link cost

Configuring an IPv6 IS-IS cost for an interface
Step
1. Enter system view.
2. Enter IS-IS view.
3. Specify an IS-IS cost
style.
4. Enter IPv6 address
family view.
5. Enable IPv6 IS-IS MTR.
6. Return to IS-IS view.
7. Return to system view.
8. Enter interface view.
9. Enable IPv6 for IS-IS on
the interface.
10. Specify an IPv6 cost for
the IS-IS interface.
Configuring a global IPv6 IS-IS cost
Step
1. Enter system view.
2. Enter IS-IS view.
Command
import-route limit number
import-route isisv6 level-2 into level-1
[ filter-policy { ipv6-acl-number | prefix-list
prefix-list-name | route-policy
route-policy-name } | tag tag ] *
import-route isisv6 level-1 into level-2
[ filter-policy { ipv6-acl-number | prefix-list
prefix-list-name | route-policy
route-policy-name } | tag tag ] *
maximum load-balancing number
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
cost-style { narrow | wide |
wide-compatible | { compatible |
narrow-compatible } [ relax-spf-limit ] }
address-family ipv6 [ unicast ]
multi-topology [ compatible ]
quit
quit
interface interface-type interface-number
isis ipv6 enable [ process-id ]
isis ipv6 cost
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
475
Remarks
By default, the maximum
number of redistributed
Level 1/Level 2 IPv6 routes
is not configured.
By default, IPv6 IS-IS does
not advertise routes from
Level-2 to Level-1.
By default, IPv6 IS-IS
advertises routes from
Level-1 to Level-2.
By default, the maximum
number of ECMP routes
equals the maximum
number of ECMP routes
supported by the system.
Remarks
N/A
N/A
By default, the IS-IS cost
type is narrow.
N/A
By default, IPv6 IS-IS MTR
is disabled.
N/A
N/A
N/A
By default, IPv6 is disabled
for IS-IS on an interface.
By default, no IPv6 cost is
specified for the interface.
Remarks
N/A
N/A