Protocols And Standards; Is-Is Configuration Task List - HP HPE FlexNetwork 7500 series Configuration Manual

CLV Code
131
132
222
229
235
237

Protocols and standards

•
ISO 10589 ISO IS-IS Routing Protocol
•
ISO 9542 ES-IS Routing Protocol
•
ISO 8348/Ad2 Network Services Access Points
•
RFC 1195, Use of OSI IS-IS for Routing in TCP/IP and Dual Environments
•
RFC 2763, Dynamic Hostname Exchange Mechanism for IS-IS
•
RFC 2966, Domain-wide Prefix Distribution with Two-Level IS-IS
•
RFC 2973, IS-IS Mesh Groups
•
RFC 3277, IS-IS Transient Blackhole Avoidance
•
RFC 3358, Optional Checksums in ISIS
•
RFC 3373, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
•
RFC 3567, Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
•
RFC 3719, Recommendations for Interoperable Networks using IS-IS
•
RFC 3786, Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit
•
RFC 3787, Recommendations for Interoperable IP Networks using IS-IS
•
RFC 3847, Restart Signaling for IS-IS
•
RFC 4444, Management Information Base for Intermediate System to Intermediate System
(IS-IS)
•
RFC 5303, Three-Way Handshake for IS-IS Point-to-Point Adjacencies
•
RFC 5310, IS-IS Generic Cryptographic Authentication

IS-IS configuration task list

Tasks at a glance
Configuring basic
•
(Required.)
•
(Optional.)
•
(Optional.)
Name
Inter-Domain Routing Protocol Information
IP Interface Address
MT-ISN
M-Topologies
MT IP. Reach
MT IPv6 IP. Reach
IS-IS:
Enabling IS-IS
Setting the IS level and circuit level
Configuring P2P network type for an interface
141
PDU Type
L2 LSP
IIH, LSP
LSP
IIH, LSP
LSP
LSP