No Snmp User - Siemens SIMATIC NET Configuration Manual

Network protocols
7.4 SNMP
Result
The details of the SNMP user are configured.
Further notes
You delete the settings with the
You display the configured users with the
7.4.2.21

no snmp user

Description
With this command, you delete the details of an SNMP user.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp user <UserName>
The parameter has the following meaning:
Parameter
UserName
Result
The details of the SNMP user are deleted.
Further notes
You change the settings with the
You display the configured users with the
350
command.
no snmp user
show snmp user
Description
Name of the user
command.
snmp user
show snmp user
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
command.
Range of values / note
max. 32 characters
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05