Show Coordinates; Show Device Information - Siemens SIMATIC NET Configuration Manual

Configuration
3.1 System
Result
The configuration for the timeout is displayed.
3.1.1.2

show coordinates

Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show coordinates
Result
The system coordinates are displayed.
3.1.1.3

show device information

Description
This command shows information about the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show device information
36
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05