Wlan Fragmentation Threshold - Siemens SIMATIC NET Configuration Manual

Network structures
6.1 WLAN
6.1.5.43

wlan fragmentation threshold

Description
With this command, you specify the maximum packet size transferred on the wireless link.
Large packets are divided up into small packets prior to transmission and then reassembled
into the original size after they have been received.
Requirement
● The transmission standard 802.11g or 802.11a is set.
● You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan fragmentation threshold <bytes(256-2346)>
The parameter has the following meaning:
Parameters
bytes
Result
The packet size is specified.
Further notes
You configure the transmission standard with the
You display the setting with the
194
Description
Packet size in bytes
show wlan advanced <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
256...2346
Default: 2346
command.
wlan mode
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05