Siemens SIMATIC NET Configuration Manual page 68

Configuration
3.2 Load and Save
File type
WLANServC
ert
(in client
mode only)
WLANSigRe
c
(in client
mode only)
WLANSpec-
trumAnalyz-
er
(Only in
access point
mode)
Table 3- 2
File type
Config
ConfigPack
CountryList
Debug
EDS
Firmware
GSDML
HTTPS Cert
LogFile
MIB
RunningCLI
Script
StartupInfo
Users
68
Description
Server certificate.
The zip file contains the following:
csv file with the measured values of the signal
•
recorder
pdf file with the measured values and an addi-
•
tional graphic representation of the measured
values.
You will find information about the measured val-
ues and their graphic representation in the section
"Signal recorder (Page 94)".
The Zip file contains a csv file with the measured
values of the spectrum analyzer.
You will find information about the measured val-
ues and their graphic representation in the section
"Auto-Hotspot".
TFTP
Description
Start configuration
Detailed configuration information. for example, start
configuration, users, certificates
The zip file contains the country list as a csv and as a
pdf file.
This file contains information for Siemens Support.
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
EtherNet/IP mode
Loading firmware updates
Information on the device properties (PNIO)
HTTPS certificate
File with entries from the event log table
Private MSPS MIB file "Scalance_w_msps.mib"
This file contains an overview of the current configura-
tion in the form of CLI commands. You can download
the text file. The file is not intended to be uploaded
again unchanged.
CLI script file
Startup log file
File with user names and passwords
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Down- Save Delete
load
X X
-- X
-- X
Save Down-
load
X
X
X
X
X
X
X
X
X
X
X
--
X
X
X
X
X
X
X
--
--
--
X
--
X
--
--
--
X
--
X