Interface Identifiers And Addresses; Naming Interfaces - Siemens SIMATIC NET Configuration Manual

2.5

Interface identifiers and addresses

2.5.1

Naming interfaces

Addressing interfaces
The device has several types of interface that are addressed in different ways:
Addressing physical interfaces
This notation also applies to other commands that address an Interface.
● Enter the command "
● Specify the interface type
● After a space, enter the interface identifier,
The interface identifier is made up of the module number and the port number separated
by a slash. The interfaces permanently installed in the device are identified with module
0.
Examples:
Fast Ethernet:
WLAN1:
Addressing logical interfaces
This notation also applies to other commands that address a logical interface.
● VAP / WDS
– Enter the command "
– Specify the interface type
– After a space, enter the interface identifier,
Example:
VAP 1.1:
● VLAN
– Enter the command "
– Enter the keyword for the VLAN interface.
– After a space, enter the number of the VLAN interface you assigned when you created
Example:
VLAN 2:
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
interface
<interface-type>
interface fa 0/1
interface wlan 0/1
interface
The interface identifier is made up of the module number and the port number
separated by a slash. The interfaces permanently installed in the device are identified
with module 0.
interface vap1 0/1
interface
it.
interface vlan 2
2.5 Interface identifiers and addresses
".
.
<interface-id>
".
.
<interface-type>
<interface-id>
".
Description
.
.
25