Ipcf-Mc; The "Show" Commands; Show Wlan Ipcf-Mc - Siemens SIMATIC NET Configuration Manual

4.4

iPCF-MC

This section describes the commands relevant for working with the iPCF-MC function
(industrial Point Coordination Function - Management Channel).
Note
The commands are only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AA0
(US version))
4.4.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
4.4.1.1

show wlan ipcf-mc

Note
The command is only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
Description
This command shows the settings of iPCF-MC.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show wlan ipcf-mc
Result
The iPCF_MC settings are displayed.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
Functions specific to SCALANCE
4.4 iPCF-MC
103