Wlan Outdoor; No Wlan Outdoor - Siemens SIMATIC NET Configuration Manual

6.1.5.52

wlan outdoor

Description
With this command, you enable the outdoor mode. In outdoor mode, the selection of country-
dependent channels and the transmit power for operation are restricted for outdoor use.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameter assignment:
wlan outdoor
Result
The outdoor mode is enabled.
Further notes
You display the setting with the
You disable the function with the
See also
no wlan outdoor (Page 203)
6.1.5.53

no wlan outdoor

Description
With this command, you disable the outdoor mode or enable the indoor mode. This setting is
activated as default.
In indoor mode, all the country-dependent permitted channels and transmit power settings
are available for operation in a building.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameter assignment:
no wlan outdoor
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
show wlan basic <wlan 0/X>
command (default setting).
no wlan outdoor
Network structures
6.1 WLAN
command.
203