Show Ssl Server-Cert; Arp; The "Show" Commands; Show Ip Arp - Siemens SIMATIC NET Configuration Manual

7.7.1.2

show ssl server-cert

Description
This command shows the SSL server certificate.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ssl server-cert
Result
The SSL server certificate is displayed.
7.8

ARP

This section describes commands of the Address Resolution Protocol (ARP).
7.8.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
7.8.1.1

show ip arp

Description
With this command, you display the IP ARP table.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
or
cli#
do [command]
[command]
you can execute the "show" commands in every
with the "show" command that you want to execute.
Network protocols
7.8 ARP
363