Wlan Antenna Gain-5Ghz - Siemens SIMATIC NET Configuration Manual

Network structures
6.1 WLAN
Further notes
You show the set antenna gain with the
6.1.5.15

wlan antenna gain-5GHz

Description
With this command, you specify the antenna gain of the antenna type "User defined" in the 5
GHz frequency band. With the
transmit power is exceeded with the setting.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan antenna gain-5GHz <index(1)> <dBi (0-30)>
The parameters have the following meaning:
Parameter
index
gain value
Result
The antenna gain is specified.
Further notes
You show the set antenna gain with the
168
show wlan antennas <wlan 0/X>
show wlan basic
Description
Slot no. of the interface
Antenna gain in decibels iso-
tropic (dBi)
show wlan antennas <wlan 0/X>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
command, check whether the maximum
Range of values / note
1
0 ... 30
0 = antenna is not connected
Configuration Manual, 10/2015, C79000-G8976-C351-05
command.
command.