Table of Contents
Advertisement
vrrp
Syntax
vrrp
Context
monitor>router
Description
This command enables the context to configure criteria to monitor VRRP statistical information for a
VRRP enabled on a specific interface.
instance
Syntax
instance interface interface-name vr-id virtual-router-id [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor>router>vrrp
Description
Monitor statistics for a VRRP instance.
Parameters
interface-name — The name of the existing IP interface on which VRRP is configured.
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a decimal
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
subscriber
Syntax
subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [base | ingress-queue-
id ingress-queue-id | egress-queue-id egress-queue-id] [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor>service
Description
This command monitors statistics for a subscriber.
Parameters
sub-ident-string — Specifies an existing subscriber identification profile to monitor.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
7710 SR OS Basic System Configuration Guide
integer.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
Values
sap-id
null
[port-id| bundle-id | lag-id| aps-id]
dot1q
[port-id| bundle-id | lag-id| aps-id]:qtag1
Basic CLI Commands
Page 99
Advertisement
Table of Contents
