Table of Contents
Advertisement
Monitor CLI Commands
ingress — Displays the customer's multi-service-site ingress scheduler policy.
egress — Displays the customer's multi-service-site egress scheduler policy.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
sap
Syntax
sap port-id[:encap-val] [scheduler scheduler-name] [ingress | egress] [interval seconds]
[repeat repeat] [absolute | rate]
Context
monitor>qos>scheduler-stats
Description
Use this command to monitor scheduler statistics for a SAP at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified SAP. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
port-id[:encap-val] — The physical port identifier portion of the SAP definition.
scheduler scheduler-name — Specify an existing scheduler-name. Scheduler names are configured
ingress — Displays scheduler-name statistics applied on the ingress SAP.
egress — Displays scheduler-name statistics applied on the egress SAP.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
Page 74
Default
11 seconds
Values
11 — 60
Default
10
Values
1 — 999
processing. No calculations are performed on the delta or rate statistics.
of the delta.
in the config>qos>scheduler-policy>tier level context.
Values
An existing scheduler-name in the form of a string up to 32 characters long com-
posed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Default
11 seconds
Values
11 — 60
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
