Alcatel-Lucent 7710 SR Configuration Manual page 100

Monitor CLI Commands
sla-profile sla-profile-name — Specifies an existing SLA profile.
interval seconds — Configures the interval for each display in seconds
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
base — Monitor base statistics.
ingress-queue-id ingress-queue-id — Monitors statistics for this queue.
egress-queue-id egress-queue-id — Monitors statistics for this queue.
Sample Output
A:Dut-A# monitor service subscriber alcatel_100 sap 1/2/1:101 sla-profile sla_default
===============================================================================
Page 100
Default 11
Values
11 — 60
Default
10
Values 1 — 999
Default
mode delta
of the delta.
Values 1 — 32
Values
1 — 8
7710 SR OS Basic System Configuration Guide
qinq [port-id | bundle-id | lag-id]:qtag1.qtag2
atm [port-id | aps-id][:vpi/vci|vpi|vpi1.vpi2]
frame [port-id | aps-id]:dlci
cisco-hdlc slot/mda/port.channel
ima-grp bundle-id[:vpi/vci|vpi|vpi1.vpi2]
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 16
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
lag-id
lag keyword
id 1 — 64
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi 0 — 4095 (NNI)
0 — 255 (UNI)
vci 1, 2, 5 — 65535
dlci 16 — 1022
lag-id