Table of Contents
Advertisement
System Command Reference
Peer Commands
peer
Syntax
[no] peer ip-address
Context
config>redundancy>multi-chassis
Description
This command configures a multi-chassis redundancy peer.
Parameters
ip-address — Specifies a peer IP address. Multicast address are not allowed.
authentication-key
Syntax
authentication-key [authentication-key | hash-key] [hash | hash2]
no authentication-key
config>redundancy>multi-chassis>peer
Context
Description
This command configures the authentication key used between this node and the multi-chassis peer.
The authentication key can be any combination of letters or numbers.
Parameters
authentication-key — Specifies the authentication key. Allowed values are any string up to 20
hash-key — The hash key. The key can be any combination of ASCII characters up to 33 (hash1-key)
hash — Specifies the key is entered in an encrypted form. If the hash or hash2 parameter is not used,
hash2 — Specifies the key is entered in a more complex encrypted form that involves more
Page 346
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
or 55 (hash2-key) characters in length (encrypted). If spaces are used in the string, enclose the
entire string in quotation marks (" ").
the key is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in
encrypted form in the configuration file with the hash or hash2 parameter specified.
variables then the key value alone, this means that hash2 encrypted variable cannot be copied and
pasted. If the hash or hash2 parameter is not used, the key is assumed to be in a non-encrypted,
clear text form. For security, all keys are stored in encrypted form in the configuration file with
the hash or hash2 parameter specified.
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
