Table of Contents
Advertisement
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
router
Syntax
router router-instance
Context
monitor
Description
This command enables the context to configure criteria to monitor statistical information for BGP,
ISIS, LDP, MPLS, OSPF, RIP, and RSVP protocols.
Parameters
router-instance — Specify the router name or service ID.
neighbor
Syntax
neighbor ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor>router>bgp
Description
This command displays statistical BGP neighbor information at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified neighbor(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — Displays damping information for entries received from the BGP neighbor.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
7710 SR OS Basic System Configuration Guide
Default
10
Values
1 — 999
of the delta.
Values
router-name:
service-id:
Default
Base
Up to 5 IP addresses can be specified.
Default
5 seconds
Values
3 — 60
Base, management
1 — 2147483647
Basic CLI Commands
Page 75
Advertisement
Table of Contents
