Alcatel-Lucent 7710 SR Configuration Manual page 352

System Command Reference
interval
Syntax interval interval
no interval
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description This command specifies the polling interval of the ring-node connectivity verification of this ring
node.
Default
5
Parameters
interval — Specifies the polling interval, in minutes.
service-id
Syntax service-id service-id
no service-id
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description This command specifies the service ID of the SAP used for the ring-node connectivity verification of
this ring node.
Default
no service-id
Parameters service-id — Specifies the service ID of the SAP.
src-ip
Syntax src-ip ip-address
no src-ip
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
This command specifies the source IP address used in the ring-node connectivity verification of this
ring node.
Default
no src-ip
Parameters ip-address — Specifies the address of the multi-chassis peer.
Page 352
Values
1 — 6000
Values
1 — 2147483647
7710 SR OS Basic System Configuration Guide