Table of Contents
Advertisement
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
group
Syntax
group grp-ip-address [source ip-address] [interval interval] [repeat repeat] [absolute |
rate]
Context
monitor>router>pim
Description
This command monitors statistics for a PIM source group.
Parameters
grp-ip-address — The IP address of an multicast group that identifies a set of recipients that are
source ip-address — The source IP address to use in the ping requests in dotted decimal notation.
interval interval — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
7710 SR OS Basic System Configuration Guide
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
interested in a particular data stream.
Default
The IP address of the egress IP interface.
Values
0.0.0.0 — 255.255.255.255
Default
10 seconds
10|20|30|40|50|60
Values
Default
10
Values
1 — 999
of the delta.
Basic CLI Commands
Page 93
Advertisement
Table of Contents
