Table of Contents
Advertisement
Parameters
interface — Specify the interface's IP address (ip-address) or interface name (ip-int-name). Up to 5
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
service
Syntax
service
Context
monitor
Description
This command enables the context to configure criteria to monitor specific service SAP criteria.
id
Syntax
id service-id
Context
monitor>service
Description
This command displays statistics for a specific service, specified by the service-id, at the configured
interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display. When the keyword
rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
service-id — The unique service identification number which identifies the service in the service
7710 SR OS Basic System Configuration Guide
interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
domain.
Basic CLI Commands
Page 95
Advertisement
Table of Contents
