Table of Contents
Advertisement
Monitor CLI Commands
The first screen displays the current statistics related to the specified neighbor(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
nbr-rtr-id — The IP address to uniquely identify a neighboring router in the autonomous system.
area area-id — The OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
virtual-neighbor
Syntax
virtual-neighbor nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>ospf
monitor>router>ospf3
Description
This command displays statistical OSPF virtual neighbor information at the configured interval until
the configured count is reached.
The first screen displays the current statistics related to the specified OSPF virtual neighbor router.
The subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
nbr-rtr-id — The IP address to uniquely identify a neighboring router in the autonomous system.
area area-id — The OSPF area ID, expressed in dotted decimal notation or as a 32-bit decimal
interval seconds — Configures the interval for each display in seconds.
Page 92
integer.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
integer.
7710 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
