Alcatel-Lucent 7710 SR Configuration Manual page 328

System Command Reference
System Synchronization Configuration Commands
sync-if-timing
Syntax sync-if-timing
Context config>system
Description
This command creates or edits the context to create or modify timing reference parameters.
not enabled (The ref-order must be specified in order for this command to be enabled.)
abort
Syntax abort
Context config>system>sync-if-timing
This command is required to discard changes that have been made to the synchronous interface
timing configuration during a session.
Default
No default
begin
Syntax begin
Context config>system>sync-if-timing
Description This command is required in order to enter the mode to create or edit the system synchronous
interface timing configuration.
Default
No default
commit
Syntax commit
Context config>system>sync-if-timing
Description This command is required in order to save the changes made to the system synchronous interface
timing configuration.
Default
No default
Page 328 7710 SR OS Basic System Configuration Guide