Table of Contents
Advertisement
script
Syntax
[no] script script-name [owner owner-name]
Context
config>cron>action
Description
This command creates action parameters for a script including the maximum amount of time to keep
the results from a script run, the maximum amount of time a script may run, the maximum number of
script runs to store and the location to store the results.
The no form of this command removes the script parameters from the configuration.
Default
none — No server-address is configured.
Parameters
script script-name — The script command in the action context connects and event to the script
which will run when the event is triggered.
owner owner-name — Owner name of the schedule.
The no form of this command removes the script entry from the action context.
schedule
Syntax
[no] schedule schedule-name [owner owner-name]
Context
config>cron
Description
This command configures the type of schedule to run, including one-time only (oneshot), periodic or
calendar-based runs. All runs are determined by month, day of month or weekday, hour, minute and
interval (seconds).
The no form of the command removes the context from the configuration.
Default
none
Parameters
schedule-name — Name of the schedule.
owner owner-name — Owner name of the schedule.
7710 SR OS Basic System Configuration Guide
cflash-id:
Default
TiMOS CLI
System Management
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:,
cf3-B:
Page 311
Advertisement
Table of Contents
