Table of Contents
Advertisement
boot-bad-exec
Syntax
boot-bad-exec file-url
no boot-bad-exec
Context
config>system
Description
Use this command to configure a URL for a CLI script to exec following a failure of a boot-up
configuration. The command specifies a URL for the CLI scripts to be run following the completion
of the boot-up configuration. A URL must be specified or no action is taken.
The commands are persistent between router (re)boots and are included in the configuration saves
(admin>save).
Default
no boot-bad-exec
Parameters
file-url — Specifies the location and name of the CLI script file executed following failure of the
Related
exec command on page 45 — This command executes the contents of a text file as if they were CLI
Commands
boot-good-exec
Syntax
boot-good-exec file-url
no boot-good-exec
Context
config>system
Description
Use this command to configure a URL for a CLI script to exec following the success of a boot-up
configuration.
Default
no boot-good-exec
Parameters
file-url — Specifies the location and name of the file executed following successful completion of the
7710 SR OS Basic System Configuration Guide
Values
0 — 10 (A zero value means that the endpoint will transition to the up state imme-
diately if the periodic loopback attempt succeeds.)
Default
2
boot-up configuration file execution. When this parameter is not specified, no CLI script file is
executed.
Values
file url:
local-url:
remote-url:
cflash-id:
commands entered at the console.
boot-up configuration file execution. When this parameter is not specified, no CLI script file is
executed.
Values
file url:
local-url:
local-url | remote-url: 255 chars max
[cflash-id/][file-path]
[{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
local-url | remote-url: 255 chars max
[cflash-id/][file-path]
System Management
Page 281
Advertisement
Table of Contents
