Table of Contents
Advertisement
src-mac
Syntax
src-mac ieee-address
no src-mac
Context
config>redundancy>mc>peer>mcr>node>cv
Description
This command specifies the source MAC address used for the Ring-Node Connectivity Verification
of this ring node.
A value of all zeroes (000000000000 H (0:0:0:0:0:0)) specifies that the MAC address of the system
management processor (CPM) is used.
Default
no src-mac
Parameters
ieee-address — Specifies the source MAC address.
vlan
Syntax
vlan [0..4094]
no vlan
Context
config>redundancy>mc>peer>mcr>node>cv
Description
This command specifies the VLAN tag of the SAP used for the ring-node connectivity verification of
this ring node. It is only meaningful if the value of service ID is not zero. A zero value means that no
VLAN tag is configured.
Default
no vlan
Parameters
[0..4094] — Specifies the set of VLAN IDs associated with the SAPs that are to be controlled by the
7710 SR OS Basic System Configuration Guide
slave peer.
System Management
Page 353
Advertisement
Table of Contents
