Alcatel-Lucent 7710 SR Configuration Manual page 46

Global Commands
<< — Stdin can be used as the source of commands for the exec command. When stdin is used as the
eof_string — The ASCII printable string used to indicate the end of the exec file when stdin is used as
Related
boot-bad-exec command on page 281 —
Commands
boot-good-exec command on page 281 —
exit
Syntax exit [all]
Context <GLOBAL>
Description This command returns to the context from which the current level was entered. For example, if you
navigated to the current level on a context by context basis, then the exit command only moves the
cursor back one level.
A:ALA-1# configure
A:ALA-1>config# router
A:ALA-1>config>router# ospf
A:ALA-1>config>router>ospf# exit
A:ALA-1>config>router# exit
A:ALA-1>config# exit
If you navigated to the current level by entering a command string, then the exit command returns the
cursor to the context in which the command was initially entered.
A:ALA-1# configure router ospf
A:ALA-1>config>router>ospf# exit
A:ALA-1#
The exit all command moves the cursor all the way back to the root level.
A:ALA-1# configure
A:ALA-1>config# router
A:ALA-1>config>router# ospf
A:ALA-1>config>router>ospf# exit all
A:ALA-1#
Parameters
all — Exits back to the root CLI context.
Page 46
exec command input, the command list is terminated with <Ctrl-C>, "EOF<Return>" or
"eof_string<Return>".
If an error occurs entering an exec file sourced from stdin, all commands after the command
returning the error will be silently ignored. The exec command will indicate the command error
line number when the stdin input is terminated with an end-of-file input.
the exec file source. <Ctrl-C> and "EOF" can always be used to terminate an exec file sourced
from stdin.
Default <Ctrl-C>, EOF
exec following a failed configuration boot.
exec following a successful configuration boot.
7710 SR OS Basic System Configuration Guide
Use this command to configure a URL for a CLI script to
Use this command to configure a URL for a CLI script to