Show Commands
Table 15: Show BOF Output Fields (Continued)
Sample Output
A:ALA-1# show bof cf3:
=====================================================================
BOF on cf3:
=====================================================================
autonegotiate
===============================================================================
A:ALA-1#
A:ALA-1# show bof booted
=====================================================================
System booted with BOF
=====================================================================
Page 168
Label
persist
wait
autonegotiate
duplex
speed
console speed
dns domain
primary-image
ftp://test:test@192.168.xx.xx/./both.tim
primary-config
ftp://test:test@192.168.xx.xx/./1xx.cfg
secondary-image
cf1:/i650/
secondary-config cf1:/config.cfg
address
192.168.xx.xxx/20 active
address
192.168.xx.xxx/20 standby
primary-dns
192.168.xx.xxx
dns-domain
test.test.com
autonegotiate
duplex
full
speed
100
wait
2
persist
off
console-speed
115200
primary-image
ftp://test:test@192.168.xx.xx/./both.tim
primary-config
ftp://test:test@192.168.xx.xx/./103.cfg
secondary-image
cf1:/i650/
secondary-config cf1:/config.cfg
address
192.168.xx.xxx/20 active
7710 SR OS Basic System Configuration Guide
on — Persistent indexes between system reboots is enabled.
off — Persistent indexes between system reboots is disabled.
The time configured for the boot to pause while waiting for console
input.
No autonegotiate — Autonegotiate not enabled.
autonegotiate — Autonegotiate is enabled.
half — Specifies that the system uses half duplex.
full — Specifies that the system uses full duplex.
CCM
The speed of the
Ethernet interface.
The console port baud rate.
The domain name used when performing DNS address resolution.
Description