Table of Contents
Advertisement
interface interface-name — Specify the interface name.
bypass-routing — Send the ping request to a host on a directly attached network bypassing the
count requests — The number of ping requests to send to the remote host, expressed as a decimal
do-not-fragment — Specifies that the request frame should not be fragmented. This option is
router router-instance — Specify the router name or service ID.
timeout timeout — Specify the timeout in seconds.
pwc
Syntax
pwc [previous]
Context
<GLOBAL>
Description
This command displays the present or previous working context of the CLI session. The pwc com-
mand provides a user who is in the process of dynamically configuring a chassis a way to display the
current or previous working context of the CLI session. The pwc command displays a list of the CLI
nodes that hierarchically define the current context of the CLI instance of the user.
For example,
ALA-1>config>router>bgp>group# pwc
-----------------------------------------------
Present Working Context :
-----------------------------------------------
<root>
-----------------------------------------------
ALA-1>config>router>bgp>group#
7710 SR OS Basic System Configuration Guide
Default
Per the routing table.
Values
A valid IP next hop IP address.
routing table. The host must be on a directly attached network or an error is returned.
integer.
Default
5
Values
1 — 10000
particularly useful in combination with the size parameter for maximum MTU determination.
Default
Base
Values
router-name:
service-id:
Default
5
Values
1 — 10
configure
router Base
bgp
group test
ospf
area 1
Base, management
1 — 2147483647
Basic CLI Commands
Page 55
Advertisement
Table of Contents
