Table of Contents
Advertisement
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
aal-5 — Displays ATM Adaptation Layer 5 (AAL5) information.
ilmi — Monitors ATM ILMI statistics.
pvc — Identifies the port by the PVC identifier (vpi/vci).
pvp — Identifies the port by the permanent virtual path.
pvt — Identifies the port by the permanent virtual tunnel.
oam — Identifies the port by the OAM test suite ID.
qos
Syntax
qos
Context
monitor
Description
This command enables the context to configure criteria to monitor QoS scheduler statistics for spe-
cific customers and SAPs.
customer
Syntax
customer customer-id site customer-site-name [scheduler scheduler-name] [ingress |
egress] [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>qos>scheduler-stats
Description
Use this command to monitor scheduler statistics per customer multi-service-site. The first screen
displays the current statistics related to the specified customer ID and customer site name. The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display. When the keyword rate is specified, the "rate per second" for each statistic is displayed
instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. These
commands display selected statistics per the configured number of times at the interval specified.
Parameters
customer-id — Specifies the ID number to be associated with the customer, expressed as an integer.
site customer-site-name — Specify the customer site which is an anchor point for ingress and egress
scheduler scheduler-name — Specify an existing scheduler-name. Scheduler names are configured
7710 SR OS Basic System Configuration Guide
Default
Default mode delta
instead of the delta.
Default
Default mode delta
Values
1 — 2147483647
virtual scheduler hierarchy.
in the config>qos>scheduler-policy>tier level context.
Values
An existing scheduler-name is in the form of a string up to 32 characters long com-
posed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Basic CLI Commands
Page 73
Advertisement
Table of Contents
