Alcatel-Lucent 7710 SR Configuration Manual page 91

Service router os basic system
Hide thumbs Also See for 7710 SR:
Table of Contents

Advertisement

Bad Packets
Option Mismatches: 0
===============================================================================
ALA-12>monitor>router#
neighbor
Syntax
neighbor [router-id] [interface-name] [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>ospf3
Description
This command displays statistical OSPF or OSPF3 neighbor information at the configured interval
until the configured count is reached.
The first screen displays the current statistics related to the specified OSPF neighbor(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
neighbor ip-address — The IP address to display information for entries received from the specified
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
router-id — The router ID for an existing IP interface.
virtual-link
Syntax
virtual-link nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>ospf
monitor>router>ospf3
Description
This command displays statistical OSPF virtual link information at the configured interval until the
configured count is reached.
7710 SR OS Basic System Configuration Guide
: 0
OSPF neighbor. Up to 5 IP addresses can be specified.
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
Basic CLI Commands
LSA not in LSDB
: 0
Nbr Duplicates
: 0
Page 91

Advertisement

Table of Contents
loading

Table of Contents