Alcatel-Lucent 7710 SR Configuration Manual page 315

Service router os basic system
Hide thumbs Also See for 7710 SR:
Table of Contents

Advertisement

type
Syntax
type {schedule-type}
Context
config>cron>sched
Description
This command specifies how the system should interpret the commands contained within the
schedule node.
Parameters
schedule-type — Specify the type of schedule for the system to interpret the commands contained
weekday
Syntax
[no] weekday {weekday-number [..weekday-number]|day-name [..day-name]| all}
Context
config>cron>sched
Description
This command specifies which days of the week that the schedule will fire on. Multiple days of the
week can be specified. When multiple days are configured, each of them will cause the schedule to
occur. If a weekday is configured without configuring month, day-of-month,
event will not execute.
Using the weekday command as well as the day-of month command will cause the script to run
twice. For example, consider that "today" is Monday January 1. If "Tuesday January 5" is configured,
the script will run on Tuesday (tomorrow) as well as January 5 (Friday).
The no form of this command removes the specified weekday from the configuration.
Parameters
day-number — Specifies a weekday number.
day-name — Specifies a day by name
all — Specifies all days of the week.
7710 SR OS Basic System Configuration Guide
within the schedule node.
Values
periodic — Specifies a schedule which runs at a given interval.
specified for this feature to run successfully.
calendar — Specifies a schedule which runs based on a calendar. weekday, month,
day-of-month,
fully.
oneshot — Specifies a schedule which runs one time only. As soon as the first
event specified in these parameters takes place and the associated event occurs, the
schedule enters a shutdown state. month, weekday, day-of-month,
must be specified for this feature to run successfully.
Default
periodic
Values
1 —7 (maximum 7 week-day-numbers)
Values
sunday, monday, tuesday, wednesday, thursday, friday, saturday (maximum 7 week-
day names)
hour
and
minute
must be specified for this feature to run success-
System Management
interval
must be
hour
and
minute
hour
and minute, the
Page 315

Advertisement

Table of Contents
loading

Table of Contents